♕Tri Flow Kitchen Faucets Manufacturer since 1997
RO Water Faucet | 3 Way Water Filter Tap | Tri Flow Kitchen Faucet | Purified Water Filtration Taps
Menu

Installation of new spout "O" rings

Home » ROLYA Blog

Installation of new spout "O" rings:

  • Turn off the hot & cold water supply under the sink unit.
  • Unscrew the spout collar by hand.
  • Pull the spout out of the body of the tap.
  • Remove the two black "O" rings.
  • Fit new greased "O" rings.
  • Gently push the spout into the body.
  • Screw the spout collar, hand tight.
  • Turn on the hot & cold water.
Home About UsProductsContact UsROLYA Blog RSS
CoryRight © 2020 ROLYA All Rights Reserved.